Early-stage modeling and analysis of continuum compliant structure for multi-DOF endoluminal forceps using pseudo-rigid-body model.

Early detection and treatment of intraluminal diseases enable minimally invasive surgery and can lead to a high cure rate. Advanced devices with multiple degrees of freedom (DOFs) make narrow intraluminal procedures easier and safer. In a previous study, we developed a multi-DOF compliant endoluminal forceps with a tendon-sheath mechanism. The maximum bending stress of this design was reduced by changing the thickness of a compliant hinge in each segment, and the forceps achieved a wide range of motion. However, its deformed shapes with a non-constant curvature, due to a compliant inhomogeneous-thickness hinge structure, hinder fine manipulation in a narrow lumen. Here, we construct an accurate model of this compliant inhomogeneous-thickness hinge structure using pseudo-rigid-body model. In the proposed method, each compliant hinge is represented by a torsion spring and rotational joint, and the deformed shape is estimated from the bending angle caused by the tensile force. We derive the coefficient of dynamic friction by considering the friction between the wire and compliant joint based on a belt friction model. These novel calculations allow to consider individual differences in material properties and surface roughness. We experimentally confirm the feasibility of constructing a highly accurate model with a lower calculation cost than the finite element method. Our proposal seems suitable for developing dexterous forceps and other endoluminal devices, such as catheters, which mitigate operation errors and help approach lesions in narrow lumens. [ABSTRACT FROM AUTHOR]