Thermal treatment of decabrominated diphenyl ether in its highly contaminated soil in Taiwan.

Polybrominated diphenyl ethers (PBDEs) were commonly used flame retardants in the world, while some of PBDEs have been listed as persistent organic pollutants (POPs). Decabrominated diphenyl ether (BDE-209) was the most commercially used PBDEs. A farm near the factory located in Northern Taiwan was highly contaminated with BDE-209. Since PBDEs in the contaminated soils can be uptake by crops shown in our previous studies and could be potentially consumed by humans, it is very important to establish a feasible treatment method for PBDE remediation in this contaminated farm. Thermal treatment of PBDEs in soil was studied. The initial concentration of BDE-209 in contaminated soil was 1.472 mg/kg. A series of thermal experiments under different operating conditions including various temperature (105, 150, 200, 250, 300, 350, 400 and 450 °C), holding time (10, 20 and 30 min), heating rate (5, 10, 20 and 40 °C/min), and soil amount (10, 100, 1000 and 2000 g) were investigated. The optimal heating conditions for thermal treatment of contaminated soil were heating at 450 °C for 30 min with a heating rate of 10 °C/min. Under this condition, the removal of BDE-209 in the different weights of contaminated soil was tested. The soils in the contaminated farm were tested to further evaluate the feasibility of remediating the on-site PBDE contaminated soil through thermal treatment, suggesting that the holding time was extended to 2 h for the field-scale contaminated soil. The results showed that BDE-209 had been removed to below the detection limit in on-site soil. This investigation is the first study using thermal treatment to remediate soils really contaminated with PBDEs. [Display omitted] • PBDEs can be completely degraded by thermal treatment at 450 °C in on-site soil. • Thermal treatment mechanism of BDE-209 in field contaminated soil is debromination. • Optimal thermal treatment on PBDE-contaminated soil is 450 °C (10 °C/min) for 30 min. • For field trial, extending above parameter to 2 h can completely degrade PBDEs. [ABSTRACT FROM AUTHOR]