Structural Optimization Design of Three Phase Enclosed GIS Disconnector Based on MOGOA and ELM.

Due to the compact and complex internal structure of 110 kV three‐phase enclosed GIS disconnector, the voltage distribution between the contact breaks of each phase has an influence on the insulation performance of the GIS disconnector, and its internal insulation design is a difficult point to be solved. To solve this problem, this paper firstly establishes a three‐dimensional model of three‐phase enclosed GIS disconnecting switch and conducts a research on the distribution of electric field under a specific working condition, it is found that the outer corner of the static contact, the inner corner of the static arc contact, the inner corner of the outer end of the moving contact and the inner corner of the moving contact are the internal electric field concentration of the three‐phase enclosed GIS disconnector. Then, in order to further reduce the electric field strength and improve the insulation margin and performance, this paper proposes a method based on the combination of Extreme Learning Machine (ELM) and Multi‐objective Grasshopper Optimization Algorithm (MOGOA) to optimize the structural design of three‐phase enclosed GIS disconnector, and a ELM model is established, which takes the internal fillet radius of stationary arcing contact, the internal fillet radius of moving contact, the internal fillet radius of external end of dynamic and static contact, the radius of the outer corner of the two static side contacts and the opening distance of the grounding contact as the inputs, and takes the maximum electric field strength of the two static side contacts and the moving side contacts as outputs; Finally, the structural parameters are optimized by MOGOA algorithm. Compared to the pre‐optimization period, the electric field strengths of the bus bar static‐side contact, dynamic contact and static side contact of the B‐phase after optimization decreased from 20.2, 9.28 and 17.5 to 11.4, 6.65 and 11.5 kV/mm, respectively. The electric field strengths of the dynamic and static side contacts are significantly reduced, which is beneficial for improving the insulation performance of the three‐phase enclosed GIS disconnector. © 2023 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]