Performance of Pulsating Heat Pipe with a stimulus of auxiliary heat load for Battery Thermal Management System.

• Stimulus strategy with auxiliary heat load is valid for start-up promotion and heat transfer enhancement of PHP. • High interference temperature, weak auxiliary heat load and long period are optimal for stimulus strategy. • Phase-change mechanism and hysteresis of working medium in PHP is the main reason for validity of stimuls. Stimulus strategy is proposed to enhance the heat dissipation performance of Pulsating Heat Pipe (PHP) at low heat load for local hot spot regression in Battery Thermal Management (BTM). An auxiliary heat load is applied to stimulate the start-up of PHP. The performances of PHP with and without stimulus are compared and the properties of PHP after stimulus are discussed. It is concluded that the application of auxiliary heat load is able to stimulate the start-up of PHP in experiments. The strategy is mainly based on the phase-change mechanism as well as the hysteresis of working medium. Thermal resistance and the evaporator temperature are significantly reduced, if PHP starts operation after stimulus. Long period of stimulus and strong auxiliary heat load are favored for the reduction of thermal resistance and the shortening of period for start-up. The thermal resistance may be reduced by 29.1 ∼ 69.6 % and the temperature may be regressed by around 8 °C. However, PHP may suffer from temperature uplift and overshot to the maximum evaporator temperature. Therefore, high interference temperature coupled with weak auxiliary heat load and long period of stimulus are suggested as the optimal strategy. The verified strategy offers a new method for local hot spot regression and a possible way to mitigate the risk of thermal runaway, since the heat dissipation is enhanced at the initial stage of damage or destruction. [ABSTRACT FROM AUTHOR]