A novel intelligent system based on machine learning for hydrochar multi-target prediction from the hydrothermal carbonization of biomass.

Hydrothermal carbonization (HTC) is a thermochemical conversion technology to produce hydrochar from wet biomass without drying, but it is time-consuming and expensive to experimentally determine the optimal HTC operational conditions of specific biomass to produce desired hydrochar. Therefore, a machine learning (ML) approach was used to predict and optimize hydrochar properties. Specifically, biochemical components (proteins, lipids, and carbohydrates) of biomass were predicted and analyzed first via elementary composition. Then, accurate single-biomass (no mixture) based ML multi-target models (average R2 = 0.93 and RMSE = 2.36) were built to predict and optimize the hydrochar properties (yield, elemental composition, elemental atomic ratio, and higher heating value). Biomass composition (elemental and biochemical), proximate analyses, and HTC conditions were inputs herein. Interpretation of the model results showed that ash, temperature, and the N and C content of biomass were the most critical factors affecting the hydrochar properties, and that the relative importance of biochemical composition (25%) for the hydrochar was higher than that of operating conditions (19%). Finally, an intelligent system was constructed based on a multi-target model, verified by applying it to predict the atomic ratios (N/C, O/C, and H/C). It could also be extended to optimize hydrochar production from the HTC of single-biomass samples with experimental validation and to predict hydrochar from the co-HTC of mixed biomass samples reported in the literature. This study advances the field by integrating predictive modeling, intelligent systems, and mechanistic insights, offering a holistic approach to the precise control and optimization of hydrochar production through HTC. Highlights: Biochemical components of biomass were first predicted by elemental composition. The multi-target ML model accurately predicted hydrochar with R2 = 0.93. The ash, T, N, and C were the most critical factors affecting hydrochar properties. An online intelligent system based on optimal models was posted and verified. [ABSTRACT FROM AUTHOR]