Study on the multi-field coupling behavior of C/SiC composites under the combined action of the local extreme heat source and hypersonic airflow.

In this study, the CW laser is used as a local heat source to simulate the extreme thermal environment generated by shock wave interference at discontinuities in spacecraft. The ablation behavior of the thermal protection material (C/SiC) is investigated under the combined impact of high-temperature airflow and the local extreme heat source. A novel multi-field coupling numerical computation software was presented to examine this strong coupling process of fluid-solid-thermal-ablation. The program was modified using the ALE + umeshmotion ablation calculation method in the ABAQUS software to mimic the process of the material's ablative boundary retreating under the action of the CW laser until the target was perforated. ANSYS Fluent software was used to do the numerical analysis of the high-speed airflow. The results of wind tunnel experiments and numerical simulations indicate that, compared to the effect of local heat sources in static air, irregular ablation pits are formed on the material surface under the action of local heat sources in high-temperature flow fields, resulting in higher ablation rates due to mechanical denudation effects. Analysis of the localization characteristics of the flow field near the ablation pit reveals that the shock wave generated downstream of the ablation pit leads to an increase in gas temperature, pressure, and density. When the ablation amount reaches a certain threshold, the gas in the ablation pit forms vortices, leading to an increase in local heat flow and pressure. [ABSTRACT FROM AUTHOR]