Study on influence of parameters of buckling behavior in soft mechanical metamaterials.

Mechanical metamaterials are valued for their diverse properties and potential applications. Due to the instability and large deformability of soft mechanical metamaterials (SMMs), geometric reorganization will occur and lead to some unusual properties. It is possible to change the properties of materials by varying the parameters. Conventional SMMs contain a periodic distribution of holes with the same size and shape, which can be changed to a lesser extent. Periodic dispersion of regular through-hole patterns of various sizes or shapes into elastomers, resulting in metamaterials with more mechanical functionality and deformation scenarios. In this paper, we investigated the influence of parameters on the buckling mechanical behavior of SMMs and the buckling mechanical behavior of structures with multiple sizes and geometric shapes. The parameters studied include geometric parameters (pore shape, porosity and area ratio) and physical parameters (Poisson's ratio and compression mode). Simulation of the buckling behavior of SMMs uses the finite element method. The finite element software ABAQUS is used, taking into account the almost incompressible characteristics of materials, the triangular quadratic plane strain hybrid element is selected (CPE6H). Numerical calculation gives the following results: Area ratio, pore shape and compression mode have obvious effects on buckling behavior, but Poisson's ratio has little effect; the influence of parameters on the buckling critical strains varied for SMMs with various pore shapes; very different buckling behaviors will result from swapping out the pattern of holes with the same size or shape for holes with two different sizes or shapes; the expression of buckling behavior is also varied when the mix of hole shapes is modified. These findings demonstrate that the design parameters may be used to achieve the desired buckling behaviors. This is a new method that can be used to control the deformation of structures; modify the properties of the SMMs without changing stiffness; simplify the structures without significantly changing the material properties. The design path of mechanical metamaterials is increased. [ABSTRACT FROM AUTHOR]