Liquefaction and post-liquefaction behaviors of unreinforced and geogrid reinforced calcareous sand.

To explore the feasibility of geogrid reinforcement as a promising countermeasure to improve the liquefaction and post-liquefaction resistance of calcareous sand, extensive undrained monotonic and multi-stage triaxial tests were performed on unreinforced and geogrid reinforced calcareous sand with different relative densities. The test results illustrate that pore pressure generation curves of unreinforced and reinforced calcareous sand gradually evolve from S-shaped to hyperbolic-shaped with the increase in relative density, cyclic stress ratio, and effective confining pressure. Following this, a pore pressure model applicable to both unreinforced and reinforced calcareous sand is proposed. The liquefaction resistance of calcareous sand increases with the increase in relative density, whereas an elevated cyclic stress ratio increases its liquefaction susceptibility. A virtually unique relationship can be observed between the liquefaction resistance normalized to the product of phase transformation strength ratio and relative density against the number of cycles for triggering liquefaction, providing an effective means of early assessing sand liquefaction resistance. Moreover, the geogrid exhibits excellent reinforcement efficiency in enhancing the liquefaction resistance of calcareous sand at relative densities of 50% and 70%. During the post-liquefaction stage, increasing relative density and geogrid reinforcement can accelerate the recovery of stiffness and strength for liquefied calcareous sand and improve the post-liquefaction strength. In general, geogrid reinforcement is considered a good alternative to densification for improving the engineering properties of calcareous sand and offers great application prospects in marine engineering construction. • The effects of geogrid reinforcement and relative density on the liquefaction and post-liquefaction behaviors of calcareous sand are investigated. • A pore pressure model applicable to both unreinforced and reinforced calcareous sand is proposed. • The inclusion of geogrid enhances the liquefaction resistance of calcareous sand. • Increasing relative density and geogrid reinforcement accelerate the recovery of stiffness and strength for liquefied calcareous sand and improve the shear strength during the post-liquefaction stage. • Geogrid reinforcement is considered a good alternative to densification for improving the engineering properties of calcareous sand and offers great application prospects in marine engineering construction. [ABSTRACT FROM AUTHOR]