Sequestration of thiazolyl blue tetrazolium bromide and bromophenol blue onto biochar derived from American sycamore leaves.

Biochars have received much attention as efficient adsorbents for water pollutants. Besides, the chemical treatment of biochars performed to increase the adsorption capacity usually causes secondary chemical pollution and increases the cost of the process. The biomass feedstock utilised in biochar preparation impacts significantly the surface properties and adsorption capacity. Thus, the need to prepare new biochars from new feedstock with potentially high uptake capacities. Herein, we prepared new biochar (POBC) from Platanus occidentalis waste leaves (POL), which was utilised for the ultrasonic-aided adsorption of bromophenol blue (BRB) and thiazolyl blue tetrazolium bromide (TTB). The FTIR, SEM, EDX, TGA, BET, pHpzc, and elemental characterisations of POBC revealed potent surface characteristics desirable for efficient dye adsorption. An increase in the surface area from 14.31 m2/g to 31.94 m2/g and the pore volume from 0.0214 cm3/g to 0.0326 cm3/g was obtained after the conversion of the POL to POBC. Besides, the SEM images of POBC revealed a highly porous surface structure of the adsorbent. The Freundlich and pseudo-second-order model presented the best fit to the isotherm and kinetics based on the high coefficient of determination (R2 > 0.9) and low sum square errors (SSE < 0.31). The heterogeneous surface nature of POBC was inferred from the independent-oriented site model. The monolayer adsorption capacity of 45.03 mg/g and 48.8 mg/g were obtained for BRB and TTB, respectively. Thermodynamics showed an endothermic, feasible, and random uptake, and POBC displayed efficient potentials to be reused. The obtained results revealed that novel POBC is an efficient low-cost biochar with high adsorption capacity for dyes. [ABSTRACT FROM AUTHOR]