Low-cycle fatigue behaviour of extruded 7075 aluminium alloy bar: Competition of grain sizes and textures.

The low-cycle fatigue (LCF) behaviour of a large 7075 aluminium alloy bar was investigated, and the results indicated that the microstructure at the center (0R) and surface section of the bar (R) were different in terms of grain sizes and textures. The microstructure of the 0R specimen was characterised by coarser elongated grain and higher <111> texture intensity compared to that of the R specimen. The LCF life of the 0R specimen was higher than that of the R specimen at a strain amplitude range of 0.6%–0.9%, thereby indicating the dominant effect of higher texture intensity. However, the 0R specimen sustained short LCF life at low strain amplitudes of 0.4% and 0.5%, indicating the predominant effect of grain refinement. The fracture analysis results indicated that there were wider striations for the 0R specimen at a strain amplitude of 0.4%. Interestingly, the yield strength, ultimate tensile strength and elongation of the 0R specimen were higher than that of the R specimen. The higher mechanical properties of the 0R specimen was consistent with its longer low cycle fatigue life at strain amplitude range of 0.6%–0.9%. Moreover, the features of the fracture, including fracture initiation and fast fracture regions, were also elaborated. The competition of grain sizes and texture evolutions determined the LCF life of the alloy depending on the strain amplitude range: the grain size effect gradually overshadowed that of the texture with decreasing strain in terms of fatigue life. [ABSTRACT FROM AUTHOR]