Effect of Site Soil and Bus Bars on the Seismic Performance of an Isolated Power Transformer.

A 500-kV power transformer substation was focused on for seismic performance examination. Finite element models of the power transformer, isolation layers, site soil, bus bars and support structure were established under various analysis conditions. By inputting typical ground motions into the models, seismic time history responses were obtained. First, the seismic performance, critical position and failure modes of a single power transformer without isolation were examined. Then, the effect on the power transformer by arranging isolation bearings was confirmed. Moreover, the influence of site soil dynamic characteristics on the isolating performance of the power transformer was examined. Finally, the influence of the length margin of the bus bars on the seismic response of the isolated power transformer was analyzed. It was revealed that the bottom of the transformer bushings which were made of porcelain was a weak part. Installing isolation bearings effectively reduced the maximum stress response of the bushing for most ground motions. The dynamic characteristics of the site soil significantly affected the isolation efficiency of the power transformer, and the expected isolation effect was achieved when the soil was soft. The displacement response of the transformer was largely increased by isolation, the pulling effect of the bus bars on the porcelain bushing was significant. When the length margin of the bus bars was enlarged to 1.0 m, the influence on the bushing decreased to a low level that could be ignored. [ABSTRACT FROM AUTHOR]