Impact of laser energy density on engineering resistive switching dynamics in self-rectifying analog memristors based on BiFeO3 thin films.

This study explores the feasibility of precisely tuning the resistive switching behavior of Au/BiFeO 3 /Pt/Ti/SiO 2 /Si memristors through controlled modulation of laser energy density during pulsed laser deposition (PLD). By systematically reducing the laser energy density within the fabrication process, notable alterations in the properties of the BiFeO 3 (BFO) thin film are observed. As the laser energy density decreases, the grain size in the BFO film and the thickness of the film decrease. Furthermore, we obtain the minute structural variations in response to the diverse laser energy densities employed during the deposition process. Energy-dispersive x-ray spectroscopy analysis is employed to investigate the distribution of Ti 4 + ions within the BFO thin film. The reduction in the grain size and film thickness, along with the prominent nucleation of specifically oriented grains, and the diffusion of Ti 4 + ions, lead to the BFO memristor fabricated with a lower laser energy density having more grain boundaries and a shortened conduction path (grain boundary) in the thickness direction. Consequently, the enhanced movement of oxygen vacancies facilitates their preferential accumulation along the grain boundaries within the BFO layer, resulting in an augmented on/off ratio, rectification factor, and set current in the devices. Overall, our findings explain the significant influence of laser energy density in PLD on the microstructure and electrical properties of BFO thin films. Particularly, the lower energy densities are employed to improve electrical characteristics. This research not only enhances our fundamental understanding but also provides valuable insights into optimizing BFO memristors for reliable, robust, and practical applications. [ABSTRACT FROM AUTHOR]