Effects of annealing temperature on the microstructure, mechanical and tribological properties of TiAlSiCN coatings.

The effects of annealing temperature on the microstructure, mechanical properties, and tribological properties of TiAlSiCN coatings with C contents of 9.24 at.% and 19.45 at.% are systematically investigated. The results show that all coatings maintain cubic structures with strongly preferential orientation of (200) planes, and the microstructure transforms from amorphous embedded in (Ti, Al)(C, N) nanocrystalline to amorphous encapsulated nanocrystalline with increasing C content. Elevating annealing temperature to 800 °C leads to a continuous decline in hardness, whereas the elastic strain resistance H/E increases first and then decreases. Release of H 2 formed by the breaking of the C–H bonds at 400 °C induces a local stress transformation from compressive to tensile. The toughness and hardness decreases dramatically at 600 °C by conversion of sp3 to sp2. The wear mechanisms of the coating against Si 3 N 4 counterballs are adhesive and oxidative wear. The coefficient of friction (COF) and wear rate initially decrease followed by an increase. The coatings with a-C structure exhibit lower COF and the wear process is smoother, but showing higher wear rate. Thus, the annealed TiAlSiCN coatings with preferred C content could improve the mechanical and tribological properties. [ABSTRACT FROM AUTHOR]