Blanket test facility for mockup testing on water cooled ceramic breeder blanket system.

• The blanket testing facility for WCCB TBM was newly built in Rokkasho Fusion Institute, Japan. • An apparatus for flow accelerated corrosion testing under coolant condition of TBM was installed. • An apparatus for high heat flux testing under cooling with pressurized water using electron beam gun was installed. • An apparatus for ingress testing of pressurized water inside TBM was installed. • An apparatus for evaluating characteristics of beryllium-water reaction was installed. Intensive research and development activities have been conducted for designing a water-cooled ceramic breeder (WCCB) blanket system. In this system 325 °C/15.5 MPa of pressurized water removes heat injected and accumulated in blanket containers made of a reduced activation ferritic/martensitic steel, F82H. The container has lithium ceramics and beryllium pebbles as tritium breeder and neutron multiplier, respectively. In order to demonstrate performance of the system, especially for high-temperature pressurized water coolant, experimental apparatus have been installed in Rokkasho Fusion Institute, National Institutes for Quantum Science and Technology, Japan. These apparatuses enable to conduct the following experiment on full-scale mockups: 1) high heat flux (HHF) test to demonstrate heat removal of surface heat flux by electron beam gun simulating plasma, 2) flow assisted corrosion, 3) coolant ingress into dummy pebble beds, and 4) beryllium-water reaction between the coolant and the pebbles. In this paper, overviews, specifications, early results of these apparatus are reported. [ABSTRACT FROM AUTHOR]