Evolution law and mechanism analysis of strength for backfill under different stress and drainage conditions.

In recent years, with the improvement of construction safety requirements in deep well mining, the backfill mining method has been widely used. However, the strength of paste filling acquired in quarry often surpasses the design strength determined in laboratory settings. In view of the problems that indoor conditions cannot restore deep mining environment, and the mechanism of coupling effect under multiple fields is unclear. This paper has carried out relevant research work through theoretical analysis and indoor experiments. First of all, after completing the preparatory experiments, this paper analyzed the strength difference of backfill under different curing stress and drainage conditions, and studies the influence of different curing conditions on the strength. Secondly, MPS-6 and 5TE sensors were used to monitor the electrical conductivity, pore water pressure, porosity and other parameters of backfill during the stress-drainage curing process, and changes of parameters during curing process were analyzed. Finally, the relationship among relevant parameters and strength properties of paste backfill was analyzed, as to clarify the influence mechanism of stress-drainage curing conditions on the strength formation for paste backfill. Research shows that both stress-undrained and stress-drained conditions can effectively increase the strength of backfill. Under stress-drainage conditions, the internal porosity of backfill will decrease, and the pore water pressure of backfill will first increase slightly and then continue to decrease. Under this condition, the electrical conductivity of backfill will first increase and then continue to decrease. The entire research has important positive significance for reducing mining costs, optimizing mining processes, and developing mining technology. • The instrument is a self-developed equipment, which can monitor changes of backfill in real time. • The test blocks were cured under different stress and drainage conditions. • Binarize the scanned image of samples, and then use ImageJ to analyze the processed image. • Combined with two sensors, the relationship between microscopic parameters and strength can be explored. [ABSTRACT FROM AUTHOR]