Assessing the effects of free fall conditions on damage to chickpea seeds: A comprehensive examination of seed deterioration.

Impact damage is the most destructive effect on the seeds during harvesting, handling, and storage, both on‐farm and off‐farm. The chickpea seeds' dicotyledonous characteristics and large mass and size make them susceptible to mechanical damage under impact loading. Tests were conducted to determine the extent of damage to chickpea seeds due to the impact caused by free fall. The extent of internal damage to the chickpea seeds was determined, which included the measurement of seed deterioration by the accelerated aging method (percentage loss in germination in the accelerated aging test) and the measurement of electrical conductivity. Three independent variables were used in the test, namely: (a) drop height (3, 6, 9, and 12 m), (b) impact surface (concrete, metal, plywood and seeds on seeds), and (c) seed moisture content (10%, 15%, 20%, and 25% w.b). The results showed that drop height, impact surface, and moisture content had significant effects (p <.01) on the loss in germination percentage and change in electrical conductivity of chickpea seeds. In terms of loss in germination, the highest damage to seeds occurred at the metal impact surface (41.96%) and the least at the seed on the seed (29.71%). The highest amount of electrical conductivity was related to the seeds dropped on the metal (36.09 μS cm−1 g−1) and the lowest was related to seed‐on‐seed contact (21.68 μS cm−1 g−1). By increasing the drop height from 3 to 12 m, the loss in germination and electrical conductivity of seeds increased from 27.74% to 48.08% and from 18.72 to 40.47 μS cm−1 g−1, respectively. Increasing the moisture content of chickpea seeds from 10 to 25% causes a decrease in the amount of damage to the seeds in terms of electrical conductivity (from 38.40 to 21.18 μS cm−1 g−1), but increases the damage in the form of a loss in the percentage germination in the accelerated aging test (from 29.22% to 42.88%). To reduce the impact damage to peas caused by free fall, the height of the fall should be limited to about 6 m, and they should be prevented from hitting hard and rough surfaces. [ABSTRACT FROM AUTHOR]