Uniformity of low-pressure capacitively coupled plasmas: Experiments and two-dimensional particle-in-cell simulations.

Radio-frequency capacitively coupled plasmas (CCPs) are one of the key technologies enabling the latest etching processes in 3D NAND and FinFET manufacturing. These processes rely crucially on the precise control of the uniformity of ion/radical fluxes and ion angular and energy distribution function (IAEDF) in CCPs. The plasma behavior and scaling properties are dependent on the plasma chemistry in these processes, e.g., electro-positive Ar plasmas vs highly electro-negative O2 plasmas. With the large number of process and design parameters influencing the plasma properties, computational modeling has become an important tool in conjunction with experimental diagnostics in understanding the intricate physical mechanisms in CCPs. In this paper, a 2D particle-in-cell plasma model is used to study the kinetic behavior of low-pressure (<5 Pa) CCPs in two different representative chemistries: Ar and O2. The low-frequency RF source is at 1.356 MHz while 27.12 MHz is used for the high frequency. Simulations show a shift of the peak in the plasma density from the center of the chamber to the edge as the pressure increases from 0.3 to 2.6 Pa. The computed magnitude and spatial profile of electron density compare reasonably with experimental measurements over a range of pressure. Comparison between electro-positive and electro-negative plasmas are discussed. Modeling results for the dual frequency CCP highlight the effect of plasma uniformity on the IAEDF, especially near the outer edge of the electrodes. Collisions in the sheath increase the population of low-energy ions as the pressure is increased to 2.6 Pa. [ABSTRACT FROM AUTHOR]