Localizing an underwater sensor node using sonar and establishing underwater wireless optical communication for data transfer applications.

Locating an underwater sensor node over the seabed and acquiring fast, secure data communication between the node and an underwater vehicle could lead to advancements in underwater exploration and marine technology. Currently, the seabed is extensively mapped using multibeam sonar modules, providing detailed information about the bed. Because of its high computational requirements and cost, multibeam sonar is not suitable for this application. The aim of this article is to deploy an experimental setup with a single-beam sonar to localize the node, and then, establish a communication link. The single beam sonar has a 30° beamwidth, which can be improvised to have a full range scan using a custom pan-tilt mechanism setup. To accomplish the full-scale area mapping, underwater servo motors have been used in our customized pan-tilt mechanism. Once the localization is done using a custom pan-tilt mechanism, a line-of-sight optical wireless communication is established with a 200 kbps data rate. The channel is modeled based on the test pool experiments. The channel model is used to simulate underwater optical wireless communication (UOWC) to a longer link length and higher data rate. An underwater link length of 3.13 m was achieved at 1 W and 1 Gbps data rate with a Q factor of 6 and BER of 10−9. For this test setup and simulation parameters, various parameters such as BER and quality factor are examined. [ABSTRACT FROM AUTHOR]