Synthetic control with target sticking for on-orbit capturing using a dual-arm space robot.

On-orbit capturing is a crucial step in the application of dual-arm space robots, aiming to accurately grasp a moving target and avoid damage to the arms terminal parts (i.e. the end effectors) due to contact force saturation. This paper presents a synthetic control method with target sticking for on-orbit capturing using a dual-arm space robot system from the approaching phase to pre-grasping phase. In the approaching phase, an online trajectory planning method based on visual servoing is proposed to obtain the desired trajectories for end effectors in work space. Then the joint torques are designed by the inverse kinematics and inverse dynamics to track the desired trajectories. Different from most of the current research, a new sticking phase is proposed after the approaching phase and before the pre-grasping phase. In the sticking phase, a force and motion control method is designed to maintain a close relative distance between end effectors and the target, which can avoid saturation of contact forces and avoid damage to the end effectors. In what follows, an impedance control method is proposed in the pre-grasping phase to absorb the impact energy and grasp the target accurately. The synthetic control strategy integrates the controllers of all the phases mentioned above. Automatic switching among the phases is realized by using logic judgment according to the system real states, which is more consistent with the real capturing environment. Finally, numerical simulation results demonstrate the effectiveness of the proposed synthetic control scheme. The results can be applied to the trajectory planning and control of on-orbit capturing, avoiding contact force saturation and ensuring the safety of the system. [ABSTRACT FROM AUTHOR]