Tailoring the structural, morphological, surface wettability and hardness features of Makrofol HS for surface applications: effect of DBD treatment.

In current research, Makrofol HS polymeric films have been utilized to evaluate the alterations in the surface properties under an atmospheric-pressure dielectric barrier discharge (DBD) plasma source. Upon DBD plasma exposure with various exposure durations ranging from 10 min to 120 min, the structural, surface wettability, surface free energy, surface roughness, and hardness features of Makrofol HS films have been studied and analyzed using different techniques. The FTIR spectra demonstrated that small changes in the band intensities correspond to the C-O-C as well as C=O bonds. Further, the changes in the absorption bands are correlated to the treatment time, leading to two critical processes, degradation, and crosslinking. The results of surface wettability displayed that the liquids' contact angle decreased from 84 ± 3o, 77 ± 3o and 62 ± 2o for water, glycerol, and dimethyl to 45 ± 1o, 42 ± 1o, and 36 ± 1o for untreated and treated samples at the highest treatment time, respectively. Also, the surface free energy significantly amended with increasing plasma exposure time. This modification in the treated surface indicates the increase in the polar groups on the treated surfaces, which then become hydrophilic surfaces. The samples' surface roughness parameters Ra, Rq, and Rz increased from 0.057 ± 0.003, 0.084 ± 0.004 and 0.366 ± 0.02 mm for untreated samples to 1.463 ± 0.073, 1.707 ± 0.085, and 6.839 ± 0.34 mm for treated samples at the highest treatment time, respectively. The Vickers hardness measurements showed an increase in the Vickers hardness from 12.31 ± 0.61 kgf/mm2 for the untreated sample to 44.89 ± 2.24 kgf/mm2 for the treated sample at the highest duration. [ABSTRACT FROM AUTHOR]