Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials.

The production of municipal solid waste incineration bottom ash (MSWIBA) is substantial and has the potential to replace cement, despite challenges such as complex composition, uneven particle size distribution, and low reactivity. This paper employs sodium silicate activation of MSWIBA composite Ground-granulated Blast Furnace slag (GGBS) to improve the reactivity in preparing composite cementitious materials. It explores the hydration performance of the composite cementitious materials using isothermal calorimetric analysis, Fourier-transform infrared (FTIR) spectroscopy, XRD physical diffraction analysis, and SEM tests. SEM tests were used to explore the hydration properties of the composite gelling. The results show that with an increase in MSWIBA doping, the porosity between the materials increased, the degree of hydration decreased, and the compressive strength decreased. When the sodium silicate concentration increased from 25% to 35%, excessive alkaline material occurred, impacting the alkaline effect. This inhibited particle hydration, leading to a decrease in the degree of hydration and, consequently, the compressive strength. The exothermic process of hydration can be divided into five main stages; quartz and calcite did not fully participate in the hydration reaction, while aluminum did. The vibrational peaks of Si-O-Ti (T = Si and Al) were present in the material. The vibrational peaks of XRD, FTIR, and SEM all indicate the presence of alumosilicate network structures in the hydration products, mainly N-A-S-H and C-A-S-H gels. [ABSTRACT FROM AUTHOR]