Experimental evaluation of geosynthetic-modular block connection loads.

The design of segmental geosynthetic mechanically stabilized walls with masonry block facing is often governed by the loads that develop at the connection between the facing and geosynthetic. Yet the current understanding of the mechanisms involved in the mobilization of such connection loads is, at best, incomplete. The testing apparatus developed as part of this study facilitates simulating the transference of stresses at the face and evaluating the facing connection loads in geosynthetic-reinforced soil walls. This study assesses the connection loads between a geogrid reinforcement connected frictionally to modular concrete blocks. A comprehensive instrumentation program was implemented to capture lateral earth pressures, geosynthetic strains and loads acting at the geogrid-block connection in a geosynthetic-reinforced unit cell subjected to incremental surcharge stages. Results indicate that conventional calculations, based on earth pressure theory, may underestimate the facing connection loads, mainly when the connection loads are triggered by the differential settlement of the backfill relative to the block facing. When this mechanism dominates the mobilization at the connection, reinforcement loads increase as the differential settlement increases, developing down-drag forces at the connection between the geogrid and modular blocks. • Facing connection loads should not be understood only as a result of earth pressures. • Relative settlements between block facing wall and backfill soil cause a down-drag deformation of the reinforcement. • Down-drag deformation of the reinforcement induces significant connection loads. • The magnitude of connection loads increases with the magnitude of down-drag deformation. • Facing connection loads can be greater than the maximum reinforcement tensile load. [ABSTRACT FROM AUTHOR]