Design of CuS composite carbon-based Ni Al-LDH multifunctional phase change composite with electromagnetic shielding performance and heat storage capacity.

Fsigure GA. Synthesis and application of composite materials. Ni Al-LDH was originally grown on MPC. After PEG was compounded, the light absorption capacity of CuS was utilized to carry out photothermal energy storage through the phase change heat storage capacity of PEG, and the composite material showed electromagnetic shielding performance as well as excellent mechanical properties. [Display omitted] • MPC@Ni Al-LDH was synthesized and then combined with PEG to form composites. • Multifunctional bilayer films were synthesized two-step filtration method. • CuS and MPC in MLPC composite film effectively improve the thermal conductivity. • Latent heat of MLPC is 155.2 J/g, and its conversion efficiency is high. • It is an innovative application for composite phase change materials. CuS-based composites are widely used in the fields related to photothermal energy storage and electromagnetic shielding and are excellent candidates for composites with phase change materials. To meet the requirements of micro-integration and electromagnetic resistance of electronic products and optimize the thermal management of electronic products, it is necessary to prepare new flexible composite phase change materials. In this paper, through the design of MPC@Ni Al-LDH/CuS double-layer structure, two-step vacuum filtration method is used, and the highly conductive materials CuS and MPC are introduced into the manufacture of PCM films. With the help of Ni Al-LDH, flame retardancy is introduced. The electromagnetic wave absorption performance is enhanced, and the existence of nano-cellulose (CNF) makes the film have excellent mechanical properties. Ni Al-LDH/MPC and CuS substrates with stable and high mechanical properties are prepared by ultrasonic treatment. According to scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC) and thermogravimetry (TG) characterizations, PEG successfully entered the MPC/CuS skeleton by vacuum filtration, and flexible phase change composite bilayers (MLPC) were obtained. Due to the synergistic effect of structure and components, the obtained composite film has many different excellent functions. Specifically, when MPC@Ni Al-LDH is 15 wt%, the phase transition enthalpy, thermal conductivity, electromagnetic shielding, and electrical conductivity are 146.8 J/g, 1.07 W/m·K, 38.8 dB and 126.4 S/m, respectively. The 3600 s infrared temperature measurement results show that the sample has stable thermal properties. Due to the presence of CuS, when MPC@Ni Al-LDH is 5 wt%, its absorbance can be kept at 1.51 L/(g·cm), and its photothermal conversion efficiency can reach 90.6 %. The MPC/CuS structure in the composite film provides many heat transfer channels, which reduces the phonon scattering in the heat transfer process and significantly increases thermal conductivity. Therefore, this multifunctional flexible phase change film can be used in photothermal conversion devices and for thermal management of electronic equipment, and it has broad application prospects in wearable equipment design due to its excellent electromagnetic shielding ability and infrared thermal stealth ability. [ABSTRACT FROM AUTHOR]