Integration of High-Rate GNSS and Strong Motion Record Based on Sage–Husa Kalman Filter with Adaptive Estimation of Strong Motion Acceleration Noise Uncertainty.

A strong motion seismometer is a kind of inertial sensor, and it can record middle- to high-frequency ground accelerations. The double-integration from acceleration to displacement amplifies errors caused by tilt, rotation, hysteresis, non-linear instrument response, and noise. This leads to long-period, non-physical baseline drifts in the integrated displacements. GNSS enables the direct observation of the ground displacements, with an accuracy of several millimeters to centimeters and a sample rate of 1 Hz to 50 Hz. Combining GNSS and a strong motion seismometer, one can obtain an accurate displacement series. Typically, a Kalman filter is adopted to integrate GNSS displacements and strong motion accelerations, using the empirical values of noise uncertainty. Considering that there are significantly different errors introduced by the above-mentioned tilt, rotation, hysteresis, and non-linear instrument response at different stations or at different times at the same station, it is inappropriate to employ a fixed noise uncertainty for strong motion accelerations. In this paper, we present a Sage–Husa Kalman filter, where the noise uncertainty of strong motion acceleration is adaptively estimated, to integrate GNSS and strong motion acceleration for obtaining the displacement series. The performance of the proposed method was validated by a shake table simulation experiment and the GNSS/strong motion co-located stations collected during the 2023 Mw 7.8 and Mw 7.6 earthquake doublet in southeast Turkey. The experimental results show that the proposed method enhances the adaptability to the variation of strong motion accelerometer noise level and improves the precision of integrated displacement series. The displacement derived from the proposed method was up to 28% more accurate than those from the Kalman filter in the shake table test, and the correlation coefficient with respect to the references arrived at 0.99. The application to the earthquake event shows that the proposed method can capture seismic waveforms at a promotion of 46% and 23% in the horizontal and vertical directions, respectively, compared with the results of the Kalman filter. [ABSTRACT FROM AUTHOR]