Identification of hydraulic conductivity and groundwater contamination sources with an Unscented Kalman Smoother.

The identification of groundwater contamination sources (IGCSs) is an important requirement for the remediation and treatment of groundwater contamination. The data assimilation methods such as ensemble Kalman filter (EnKF) and ensemble smoother (ES) have been applied to IGCSs in recent years and obtained good identification results. The unscented kalman filter (UKF) is also a data assimilation method with the potential to simultaneously identify hydraulic conductivity and GCSs. However, when UKF is applied to identify hydraulic conductivity and GCSs, it is necessary to use the observed data at different times separately, which increases the complexity of the update process and this may result in low identification accuracy. ES is a variant of EnKF that updates the system parameters with all observed data in all time periods, which makes ES faster and easier to implement than EnKF. Therefore, inspired by the ES, an unscented kalman smoother (UKS) based on UKF was proposed for simultaneously identifying the hydraulic conductivity and GCSs in this study. The UKS can use the data observed in all time periods simultaneously, while it is also simpler to operate and the calculation speed is faster. Present studies have shown that ES can solve IGCS problems. Thus, ES was also applied to identify the hydraulic conductivity and GCSs in this study, and its identification performance was compared with UKS. In contrast to previous applications of ES to IGCSs, both UKS and ES were set up with stop iteration conditions instead of only performing one update process, and thus both methods applied multiple update processes. The results showed that compared with ES, the identification results obtained by UKS were characterized by greater stability, higher accuracy, and the iterative process required less iteration process and computational time. [ABSTRACT FROM AUTHOR]