Numerical investigation on effects of low Reynolds number conditions on fan shaped film cooling performances.

This study investigates the effects of low Reynolds number (Re) conditions on the cooling performance of fan-shaped film cooling holes in the gas turbine engines of high-altitude long-endurance Unmanned Aerial Vehicles (UAVs). The significance of film cooling technology becomes paramount due to the low Re operational environment of UAVs. A novel Very Large Eddy Simulation (VLES) method was employed to systematically analyze a range of mainstream Reynolds numbers (ReD) from 480 to 32 000 and blowing ratios (M) from 1.0 to 2.5 while keeping the density ratio (DR) constant at 1.75. Compared to other turbulence models, the VLES model showed the highest similarity in predicting thermal field distributions and the most accurate prediction of film cooling performance at low Re. The results reveal that at low ReD, significant flow concentration within the hole leads to reduced velocity uniformity at the outlet, resulting in poor film coverage downstream. Additionally, the coolant jet tends to detach from the wall, adversely affecting cooling performance. In contrast, higher ReD exhibited improved coolant jet adhesion to the wall and cooling efficiency, attributed to the reduced intensity of counter-rotating vortex pair and decreased hot gas entrainment, thereby enhancing cooling effectiveness. Notably, for the same ReD values, cases with M = 1.5 consistently showed better cooling effectiveness compared to other M conditions. This study provides new insight into the cooling performance of fan-shaped film cooling holes under low Reynolds number conditions, which is crucial for enhancing the cooling efficiency of gas turbines in high-altitude UAVs. [ABSTRACT FROM AUTHOR]