Characteristics and degradability of laser print waste paper fiber reinforced PLA resin matrix composite materials.

Highlights As is well known, Laser print paper is usually produced with high‐quality chemical wood pulp. The laser print waste paper fiber (LPWF) is a high‐quality secondary fiber, and the research and development of high‐value utilization technology for laser print waste paper has attracted much attention in the field of renewable resource recycling. In this study, LPWF was used to reinforce poly(lactic acid) (PLA) composites in the field, and the composites were modified with bioenzyme, cationic polyacrylamide (CPAM), and nano‐silicon carbide (Nano‐SiC) to enhance the interfacial compatibility of LPWF/PLA composites. The study systematically investigated the effects of various modification methods on the characteristics and degradability of composites made from laser print waste paper fiber reinforced PLA resin matrix. The results showed that the mechanical properties of the composites treated with CPAM and Nano‐SiC were significantly improved, with tensile strengths of 54.3 and 59.5 MPa, and flexural strengths of 85.1 and 91.5 MPa, respectively, and the water absorption of the composites was reduced after the modification treatment, while the thermal stability was improved. The degradation performance of the composites in various water environments indicated that the inclusion of LPWF accelerated the water degradation rate of the composites, with the maximum degradation rate of the composite reaching 1.26% in 30 days. Laser print waste paper is an excellent quality recyclable fiber resource. Four modifiers were used to modify LPWF/PLA composites. Characteristics and degradability of the composites were investigated. Significantly improved properties of CPAM and Nano‐SiC modified composites. The degradation rate of composites is increased by the addition of LPWF. [ABSTRACT FROM AUTHOR]