Shear mechanism of UHPC epoxied‐keyed joints in PSUBs: Experimental and numerical investigations.

Precast segmental ultra‐high‐performance concrete bridge presents broad application prospects. UHPC keyed joints play significant roles in the structural performance of such bridges, which require systematic investigation to comprehend their shear behavior and mechanism thoroughly. This study aimed to explore the shear mechanism of UHPC epoxied‐keyed joints. Experimental and numerical investigations were conducted to investigate the influence of key size, key number, key angle, and reinforcement form on the shear performance. The test results showed that the failure mode was primarily affected by the key number and reinforcement form, which can be divided into three categories: direct shear, segmental shear, and stepwise shear failure. The large‐keyed joints exhibited superior shear performance compared to the three‐keyed joints. The initial shear stiffness, ultimate bearing capacity, and normalized shear stress were 15%, 5.3%, and 5.6% higher, respectively. Furthermore, the mechanism of the two reinforcement forms was clarified. The key rebars mainly improve the ductility of the specimens, while the dowel action of the embedded rebars can enhance the shear efficiency and synergistic force ability of the joints. The numerical simulation results indicated that 2.7% was the best ratio of key rebar, and embedded rebars with larger diameters can strengthen the shear capacity and post‐peak performance of the joints. [ABSTRACT FROM AUTHOR]