Shaking Table Test Study of Dynamic Response and Failure Mode of Liquefiable Layer Slope Under Earthquake.

As a kind of special terrain, the landslide disaster generated by liquefiable layer slopes under earthquake has become a major engineering challenge due to its large scale and long slip distance. In order to study the seismic response and damage mode of liquefiable layer slope, this paper follows the research line of “geological generalization, physical modeling, and result analysis”, and takes the liquefiable layer slope in the upper reaches of the Yellow River Class secondary terrace as the object of study, generalizes the physical model of the slope, and carries out shaking table test. Based on the PGA amplification coefficient, Fourier analysis and HHT time–frequency characterization of the model slope, it was found that the PGA amplification coefficient increases gradually along the slope height, reaches the maximum value at the top of the liquefiable layer and then decreases gradually, which indicates that the liquefiable sand layer has an obvious energy dissipation effect, and on the horizontal direction of model slope is a tendency to the surface effect; the seismic waves at the discontinuous interface change drastically, and the Hilbert time–frequency spectrum transforms from multiple peaks to a single peak; with the increase of the intensity, the intrinsic frequency of the overall model decreases, and the high-frequency component within the liquefiable sand layer decreases from 5–15Hz to 0–5Hz, indicating that the liquefiable layer has a filtering effect; the damage process of the liquefiable layer slope is the tensile crack at the top of the slope — seismic subsidence at the top of the slope — the shear yielding at the angle of the slope — shear surface penetration at the slope face — overall slope instability and flow-slip damage. The research results will provide a reference for the study of the disaster mechanism of the liquefiable layer slope. [ABSTRACT FROM AUTHOR]