Prediction of internal stress in alumina laminates induced by shrinkage mismatch based on elastic model modification.

Cracks induced by internal stresses compromise the structural integrity of ceramic laminates. Such stresses can be classified into thermal stress derived from thermal expansion mismatch and shrinkage stress derived from shrinkage mismatch. Analytical models have been proposed for the former, whereas only numerical predictions have been explored for the latter. In this study, an equation is constructed to predict the shrinkage stress by modifying an elastic solution proposed in previous studies. We fabricated laminates with three‐layer sandwiched structures using only alumina specimens with high and low densities to control the shrinkage and avoid thermal mismatch. Surface cracks were initiated when the shrinkage stress exceeded the flexural strength of the surface layer. Although the original strength of the surface layer was 308.8 MPa, the laminates' flexural strength was lower than that because of shrinkage constraint. Our results demonstrate that the shrinkage stress was successfully estimated analytically using a few material properties measured in an ordinary environment. This study will ensure the structural integrity of ceramic laminates in laminate designs. [ABSTRACT FROM AUTHOR]