A non-contact method for weighting of aggregate pile based on binocular vision.

Concrete is indispensable in contemporary industry, and the weighing of aggregates directly determines the quality of concrete preparation. In response to the difficulty of traditional methods in meeting the industrial requirements for accuracy, efficiency, and cost of measurement, this paper proposes a non-contact bone pile weight measurement method based on binocular vision. Firstly, the on-site image is obtained through a binocular camera, and the camera parameters are used to improve the image edge information and preprocess the image. Then, the improved semi global matching (SGM) algorithm is used to improve computational efficiency, obtaining three-dimensional information of the aggregate pile for volume calculation. Based on the watershed algorithm and T-S inference, the aggregate clearance rate is calculated, and the initial volume is corrected. Finally, a linear relationship is established between the density of the aggregate pile and the clearance rate, and the weight of the aggregate pile can be obtained by the density formula. The experimental results on different sizes of aggregate piles shows that the average error of the experiment is less than 4%. Efficiency of improved SGM matching algorithm has increased several times compared to the original algorithm, providing a low-cost and efficient measurement method for industrial aggregate weighing. [ABSTRACT FROM AUTHOR]