Surface Chemistry and Flotation of Gold-Bearing Pyrite.

Gold grains are observed in a variety of forms, such as coarse-liberated native gold grains, and ultra-fine grains associated with sulfide or non-sulfide mineral particles, in the form of solid solution in sulfide minerals, mainly pyrite. In the flotation of gold ores, bulk sulfide mineral flotation is generally applied to maximize gold recovery. This approach gives high gold recoveries, but it also causes the recovery of barren sulfide minerals (i.e., sulfide mineral particles with no gold content), which increases concentrate tonnage and transportation costs and reduces the grade sometimes to below the saleable limit (approx. 10 g/t Au). This study addresses the differences between gold-bearing and barren pyrite particles taken from various ore deposits and utilizes these differences for the selective flotation of gold-bearing pyrite. The laboratory scale flotation tests conducted on three pyrite samples having different cyanide soluble gold contents show that a selective separation between gold-bearing pyrite and barren pyrite particles could be achieved under specific flotation conditions. Gold recovery is correlated directly with the cyanide-soluble gold in the ore samples. Electrochemical experiments were conducted to elucidate the differences in surface properties of the two types of pyrite. The barren pyrite particles were more cathodic and prone to cathodic reduction of OH− and depressant ions on the surface, and they could be depressed effectively without significantly affecting the gold-bearing particles. [ABSTRACT FROM AUTHOR]