A numerical study of the performance of solid oxide fuel cell with bi-layer interconnector.

Solid oxide fuel cell (SOFC) has attracted wide attention because its efficiency is not limited by the efficiency of Carnot cycle. The structure of flow channel in SOFC has great effects on the internal mass distribution, which influences current density. In this paper, the height of flow channel and the position, arrangement, number and height of the fin which is placed in channel, are changed to get different structures of bi-layer interconnector, and they are applied to three layers SOFC stack. The effects of each structural parameter on the current density are studied by numerical simulation. The results show that, increasing the number of fins and bi-layer interconnector height can make more reactant gas enters the electrode. In addition, compared with the conventional structure, the current density can be increased by the bi-layer interconnector up to 31.256%, and the bi-layer interconnector structure could save n-1 layers of interconnector, which reduces the volume of SOFC stack. Among the five structural parameters, the position of fins has the least influence on temperature distribution and current density, while the arrangement of fins has the highest influence on volume current density, reaching 30%. Using a staggered arrangement and higher bi-layer interconnector can also improve the temperature distribution. • A three-dimensional SOFC stack with bi-layer interconnector was established. • Changing geometry of fins and channel height to get different structures. • Increasing number of fins and channel height improve concentration distribution. • The arrangement of fins has the greatest impact on current density. • Staggered fins and higher bi-layer interconnector reduce the highest temperature. [ABSTRACT FROM AUTHOR]