Rapid investment casting: a techno-economic analysis for evaluating VAT photopolymerisation processes.

Adopting additive manufacturing in investment casting, known as rapid investment casting, can significantly reduce lead time and cost. Despite many publications on these technologies, no quantitative techno-economic analyses refer to rapid investment casting. The paper provides helpful insights and a decision-making approach for replacing conventional production technologies (i.e. wax injection) with additive manufacturing technologies. The study is based on a techno-economic analysis framework. It allows assessing key performance indicators (e.g. crossover points and payback periods) for stakeholders to decide the suitable VAT photopolymerisation processes (i.e. stereolithography, digital light processing, and material jetting) according to specific production scenarios (i.e. load factors). Analytical cost models were developed in the frame of this work to assess the time and cost of the overall manufacturing process of the resin model for investment casting, considering the post-processing stages for each of the technologies investigated. The cost models were used to assess the benefits introduced by additive manufacturing in rapid investment casting. A sensitivity analysis evaluated the impact of energy, material, and labour costs for both key performance indicators (crossover points and payback periods). The techno-economic analysis yielded the following results: (i) crossover points in terms of production costs vary, ranging from thousands of units for small components in the jewellery or fashion industries to a few dozen units for larger parts in the mechanical industry, and (ii) crossover points in terms of time are lower than those related to cost. Additionally, digital light processing is regarded as the most promising technology, offering the best crossover points and payback periods across various scenarios, mainly when 3D printers are used at a low utilisation rate. [ABSTRACT FROM AUTHOR]