Study of an electrochemical system with dual cathodes for the treatment of mariculture wastewater.

[Display omitted] • A double-cathode EF synergistic electrocatalytic system was constructed. • This system electrolyzes mariculture wastewater to produce active Cl and *OH. • The EF synergistic EO system can remove pollutants from mariculture wastewater. • Oxidizer reuse system reduces COD and NH 3 -N concentrations. • The optimal treatment of residual chlorine was explored. The salinity properties of mariculture wastewater make it a suitable candidate for electrochemical treatment. In this study, an electro-Fenton synergistic electrocatalytic system was developed using a mixed metal oxide anode, often called Dimensionally Stable Anodes (DSA), and dual cathodes, an iron-carrying activated carbon sheet as the first cathode and a stainless-steel plate as the second cathode, to treat mariculture wastewater. The reaction conditions of the system were investigated and optimized. The chemical oxygen demand (COD) removal rate reached 100 % after 80 min under the optimal conditions: an applied voltage of 3.39 V, a plate spacing of 1.07 cm, and an aeration rate of 34.84 L·h−1. The system effectively removed COD and nitrogen from mariculture wastewater. Analyses using GC–MS, UV–visible spectroscopy, and Fourier-transform infrared spectroscopy showed that the system could degrade macromolecular organic pollutants in the wastewater. Mechanistic studies revealed that active chlorine and hydroxyl radicals play crucial roles in pollutant removal. The dynamic operation study indicated that the optimal operating conditions included a vertical water flow direction through the electrodes, and a flow rate of 10 mL·min−1. The oxidant reuse experiment determined a reflux ratio of 1:1 and a reaction time of 60 min, achieving effluent COD and NH 3 -N concentrations that met the primary discharge standards. The study on residual chlorine removal showed that the input amount of sodium thiosulfate was 0.36 kg, with a treatment cost of 0.32 yuan per ton of water, and the treated effluent met the discharge standards. These results provide a reference for the industrial application of electrochemical methods in treating mariculture wastewater. [ABSTRACT FROM AUTHOR]