Mechanical performance and dimensional stability of Washingtonia/Kenaf fibres-based epoxy hybrid composites.

In this study, Washingtonia fibres (AW) and Kenaf fibres (KF) were utilized as environmentally friendly fillers to improve the quality of the resin matrix. The mechanical, morphological, and physical properties of the WA/KF biocomposites were assessed throughout this research. The mechanical tests (tensile strength and moduli, elongation at break, flexural strength along with moduli, and the impact properties) were carried out. The hybrid biocomposites (3AW/7KF) exhibited the highest tensile strength (16.05 MPa) and modulus (4.6 GPa) among pure and other hybrid biocomposites. The impact strength and resistance of hybrid biocomposites (1AW/1KF and 7AW/3KF) showed the highest impact strength (1694 J/m2) while the 3AW/7KF hybrid biocomposite, the impact strength value was 1630 J/m2 (17.2 J/m). SEM images indicated good distribution and bonding of hybrid biocomposites. The investigation using morphological tests (Scanning Electron Microscopy (SEM)) displays the longitudinal roughness on the surface, which acts as a very significant function in the adhesion between the AW/KF fibres and the resin. Furthermore, the results of SEM confirm better bonding in the biocomposites, fibre fracture, pull-out, fibre shearing, and tearing in the pure and hybrid composites. From the water absorption test, it was observed that, when increasing the immersion time of biocomposites, the WA percentage of KF biocomposite significantly increased (37%) compared to other biocomposites. However, the hybrid and pure biocomposites exhibited more resistance to increase the WA percentage after increasing the immersion times, compared to other biocomposites. Furthermore, the thickness swelling (TS) of hybrid biocomposites increased compared to pure biocomposites. The biocomposite sample (3AW/7KF) was thicker on the 7th day exhibiting the greatest increases in thickness swelling (4.98%) while the hybrid biocomposite exhibited greater WA value compared to other correspondence samples. Finally, the KF and AW hybrid blends can be appropriate for several applications, for example, textiles, machinery part production industries, medicine, and automobiles, and construction, specifically buildings, bridges, and structures such as boat hulls, swimming pool panels, racing car bodies, shower stalls, bathtubs, storage tanks. Overall, the findings exhibit that the hybridisation of natural fibres (KF/AW) is a sustainable approach for obtaining biocomposites with advanced mechanical and thermal performance. Hence, they could be used in numerous specific applications, including automobile panels, structural products, sporting goods and furniture tools. [ABSTRACT FROM AUTHOR]