Simulation study of affecting parameters during low salinity water injection in carbonate reservoirs: from core to field scale.

Over the last decade, economic and environmental factors have led to low salinity water injection (LSWI) becoming one of the most important improved oil recovery methods. Although many results have been obtained from laboratory tests, only a few papers have been published regarding the modeling and simulating LSWI in carbonate reservoirs compared to sandstone reservoirs. This paper investigated the most affecting parameters on oil recovery during LSWI at the core and field scale. The published work focused more on the effective parameters related to ultimate oil recovery using LSWI. However, important parameters affecting the oil recovery rate were not investigated. We compared how important parameters affected the ultimate oil recovery factor and ultimate oil recovery rate. According to the results of this study, the salinity of injected water and curvature of oil relative permeability were the most important factors on the ultimate oil recovery factor. By reducing both of these parameters, more increment oil was recovered. By increasing the injection rate of water, the curvature of the water relative permeability, wettability, and the endpoint of oil relative permeability, the oil recovery rate also increased. Furthermore, threshold capillary pressure and the endpoint of relative permeability of water had inverse effects on oil recovery. Injecting low salinity water into the reservoir will change its wettability. As a result, it will change the properties of the reservoir and increase the production from the reservoir, resulting in more oil being produced. LSWI resulted in an increase of oil recovery factor of 5% and 11% respectively after 25 and 58 years in this case. [ABSTRACT FROM AUTHOR]