Improvement of the Source Current Quality for a Shunt Active Power Filter Operating Using Hysteresis Technique with Stabilized Switching Frequency.

Determining the current reference for a shunt active power filter (SAPF) can be carried out in many ways. Once the reference is determined, it can be shaped by SAPF switches with the use of pulse width modulation (PWM)/hysteresis control techniques. There are many variants of shaping the compensation waveform using these techniques. Nevertheless, regardless of the PWM/hysteresis technique adopted, a switching frequency current component appears in the system. It acts as a carrier used to inject a compensating current into the grid. Once the compensating current has been entered into the grid, the switching component should be reduced in it. This can be performed using RLC passive filters in various variants. The article discusses a variable/stabilized frequency hysteresis current control technique adapted for SAPF regulation with the use of current closed-loop control (source current direct control). For this technique, the passive filter should be placed outside the current control loop. The article focuses on examining the effectiveness of the interaction of the RLC filter with SAPF acting with such a control technique. [ABSTRACT FROM AUTHOR]