Reduced methanol kinetic mechanisms for combustion applications

Abstract: Reduced chemical kinetic mechanisms for methanol combustion were investigated by evaluating ignition delay magnitudes and combustion in a continuously stirred reactor. Unsteady computations were made to study the characteristics of the kinetic mechanisms proposed in the literature and to compare the dependence of various parameters on methanol combustion. All computations were done under isobaric conditions, and, to capture the influence of all the reactions involved in the mechanism, a very small time step was used. Finite-difference methods were used to solve the coupled differential equations. The five-step mechanism developed by C.M. Mueller and N. Peters [in: N. Peters, B. Rogg (Eds.), Reduced Kinetic Mechanisms for Applications in Combustion Systems, Springer-Verlag, New York, 1993, pp. 143–155] for premixed flames and both the five-step mechanism and the four-step mechanisms developed by C.M. Mueller, K. Seshadri, J.Y. Chen [ibid, pp. 284–307] for non-premixed flames were considered. It was found that the Mueller et al. five-step mechanism, with some modifications, best supported the spontaneous ignition and continuous stirred reactor combustion. The results were validated by comparing calculated ignition delays with available experimental data of C.T. Bowman [Combust. Flame 25 (1975) 343–354], and calculated final steady-state concentrations with chemical equilibrium calculations [J.-Y. Chen, Combust. Sci. Technol. 78 (1991) 127]. Initial temperature and concentration and the operating pressure of the system have a major effect on the delay of methanol ignition. The residence time of the continuous stirred reactor affects ignition delay and also changes the transient characteristic of chemical composition of the fuel–vapor mixture. The computations are intended to guide and explain many combustion studies that require a methanol kinetic mechanism. [Copyright &y& Elsevier]