Mechanical properties of neutron-irradiated nickel-containing martensitic steels: I. Experimental study

Abstract: Tensile and Charpy specimens of 9Cr–1MoVNb (modified 9Cr–1Mo) and 12Cr–1MoVW (Sandvik HT9) steels and these steels doped with 2% Ni were irradiated at 300 and 400°C in the High Flux Isotope Reactor (HFIR) up to ≈12dpa and at 393°C in the Fast Flux Test Facility (FFTF) to ≈15dpa. In HFIR, a mixed-spectrum reactor, (n, α) reactions of thermal neutrons with 58Ni produce helium in the steels. Little helium is produced during irradiation in FFTF. After HFIR irradiation, the yield stress of all steels increased, with the largest increases occurring for nickel-doped steels. The ductile–brittle transition temperature (DBTT) increased up to two times and 1.7 times more in steels with 2% Ni than in those without the nickel addition after HFIR irradiation at 300 and 400°C, respectively. Much smaller differences occurred between these steels after irradiation in FFTF. The DBTT increases for steels with 2% Ni after HFIR irradiation were 2–4 times greater than after FFTF irradiation. Results indicated there was hardening due to helium in addition to hardening by displacement damage and irradiation-induced precipitation. [Copyright &y& Elsevier]