Evaluation of fibre bridging stress of short fatigue cracks in SCS-6/Ti-15-3 composite.

Single-edge notched specimens of a unidirectional SiC long fibre reinforced titanium alloy, were fatigued under four point bending. The propagation behaviour of short fatigue cracks from a notch was observed on the basis of the effects of fibre bridging. The branched fatigue cracks were initiated from the notch root. The fatigue cracks propagated only in the matrix and without fibre breakage. The crack propagation rate decreased with crack extension due to the crack bridging by reinforced fibres. After fatigue testing the loading and residual stresses in the reinforced fibres were measured for the arrested cracks by the X-ray diffraction method. The longitudinal stresses in the reinforced fibres were measured using high spatial resolution synchrotron radiation. A stress map around the fatigue cracks was then successfully constructed. The longitudinal stress decreased linearly with increasing distance from a location adjacent to the wake of the matrix crack. This region of decreasing stress corresponded to the debonding area between the fibre and the matrix. The interfacial frictional stress between the matrix and the fibre could be determined from the fibre stresses. The bridging stress on the crack wake was also measured as a function of a distance from a notch root. The threshold stress intensity factor range, corrected on the basis of the shielding stress, was similar to the propagation behaviour of the monolithic matrix. Hence the main factor influencing the shielding effect in composites is fibre bridging. [ABSTRACT FROM AUTHOR]