Fitness for service assessment of coolant channels of Indian PHWRs

Abstract: A typical coolant channel assembly of pressurised heavy water reactors mainly consists of pressure tube, calandria tube, garter spring spacers, all made of zirconium alloys and end fittings made of SS 403. The pressure tube is rolled at both its ends to the end fittings and is located concentrically inside the calandria tube with the help of garter spring spacers. Pressure tube houses the fuel bundles, which are cooled by means of pressurised heavy water. It, thus, operates under the environment of high pressure and temperature (typically 10MPa and 573K), and fast neutron flux (typically 3×1017 n/m2 s, E >1MeV neutrons). Under this operating environment, the material of the pressure tube undergoes degradation over a period of time, and eventually needs to be assessed for fitness for continued operation, without jeopardising the safety of the reactor. The other components of the coolant channel assembly, which are inaccessible for any in-service inspection, are assessed for their fitness, whenever a pressure tube is removed for either surveillance purpose or any other reasons. This paper, while describing the latest developments taking place to address the issue of fitness for service of the Zr–2.5wt% Nb pressure tubes, also dwells briefly upon the developments taken place, to address the issues of life management and extension of zircaloy-2 pressure tubes in the earlier generation of Indian pressurised heavy water reactors. [Copyright &y& Elsevier]