Process analysis for polygeneration of Fischer–Tropsch liquids and power with CO2 capture based on coal gasification

Abstract: This paper designs four cases to investigate the performances of the polygeneration processes, which depend on the commercially ready technology to convert coal to liquid fuels (CTL) and electricity with CO2 sequestration. With Excel-Aspen Plus based models, mass and energy conversion are calculated in detail. The simulation shows that the thermal efficiency is down with the synfuels yield decrease though the electricity generation is increased. It also suggests that the largest low heat value (LHV) loss of coal occurs in the gasification unit. From the comparison of the four cases, prominent differences of coal energy transition appear in water–gas shift (WGS) units, Fischer–Tropsch (FT) synthesis and combined cycle processes. CO2 capture and vent are discussed and the results show that the vent amount of CO2 increases with the increase of percentage of the syngas going to produce electricity. The results also show that the ratio of carbon captured to total carbon increases from 58% to 93% which is an important contribution to cutting down the greenhouse gas vent. [Copyright &y& Elsevier]