Electrical Model of an Atmospheric Pressure Dielectric Barrier Discharge Cell.

This paper presents a model of the typical dielectric barrier plasma discharge at atmospheric pressure, structured as an equivalent electric circuit whose elements are identified with, and deducted from, the main influential variables of the process, namely, the applied gas, the geometry of the reactor, the breakdown parameters, as well as the power supply associated to the dielectric barrier discharge cell. Considering a parallel-plate reactor and a high-voltage sinusoidal power supply, an electrical comprehensive Simulink/MATLAB model has been developed in order to reveal the interaction between these two elements. The main components of this discharge model are as follows: 1) a double dielectric capacitance; 2) a voltage-controlled current source; and 3) a gas capacitance associated to the ionized gas. A sinusoidal voltage of up to 15 kV peak to peak at frequencies of 12.5 and 47 kHz has been applied to the discharge electrodes. The electrical model is based on the power law proposed by Roth, which defines the V --I behavior during the discharge startup. A series of simulations has been carried out in order to estimate the total current and voltage consumed during each discharge and to identify those parameters which are not measurable during the process. Finally, both the experimental and simulated voltage and current results in helium, argon, and nitrogen, as well as their Q--V graphics, are shown, and a comparison between them is discussed. [ABSTRACT FROM AUTHOR]