Investigation of Spark-Gap Discharge in a Regime of Very High Repetition Rate.

It is our interest to design and develop a high-power pulser system employing an electrical discharge in a spark gap. The type of discharge generates short electric pulses capable of both the characteristics of a fast rise time and a high repetition rate. Such a switch pulser has wide applications in the industry. To generate the electrical discharge in the spark gap in an efficient manner is very important for the switching operation. The regime of the operation utilizes the residual plasma in the interpulse recovery of the spark gap to increase the repetition rate. Therefore, the mechanisms of the discharge in a controlled manner following the electrical breakdown of the spark gap, such as the plasma generation in the spark channel and the dielectric recovery process as well as the residual plasma in the post-spark-discharge period, are of great importance. The understanding of the type of the spark-gap discharge for the switching at a high repetition rate beyond 1 MHz has been the primary goal. The typical voltage and current ratings are below 1 kV and several amperes, respectively. In particular, this paper addresses the optimal set of several parameters, such as the spark-gap geometry, electrode gap distance, gas pressure, and gas type, in conjunction with a unique circuit scheme to drive the discharge in the controlled fashion. [ABSTRACT FROM PUBLISHER]