MODELING OF TRANSPORT PHENOMENA IN A GAS METAL ARC WELDING PROCESS.

A numerical study of three-dimensional heat transfer and fluid flow in a moving gas metal arc welding (GMAW) process is performed by considering various driving forces of fluid flow such as buoyancy, Lorentz force, and surface tension. The computation of the current density distribution and the resulting Lorentz force field is performed by solving the Maxwell equations numerically in the domain of the workpiece. The phase change process during melting and solidification is modeled using the enthalpy-porosity technique. Mass and energy transports by droplet transfer are also considered through a thermal analysis of the electrode. The droplet heat addition to the molten pool is considered to be a volumetric heat source distributed in an imaginary cylindrical cavity within the weld pool ("cavity" model). This nature of the heat source distributed due to the falling droplets takes into account the momentum and thermal energy of the droplets. The numerical model is able to capture the well-known "finger" penetration commonly observed in the GMAW process. Numerical prediction regarding the weld pool shape and size is compared with the corresponding experimental results, showing good qualitative agreement between the two. The weld pool geometry is also found to be dependant on some key parameters of welding, such as the torch speed and power input to the workpiece. [ABSTRACT FROM AUTHOR]