Seismically induced cyclic buckling of steel columns including residual-stress and strain-rate effects

Abstract: Compression buckling tests were performed on four full-scale W-shaped column specimens to investigate the buckling response of columns in multi-storey braced steel frame structures subjected to seismic strong ground motions. The test protocols included monotonically and cyclically applied concentric and eccentric axial loading. One test was conducted under dynamic cyclic loading. End moments were applied on one cyclic test. The columns were W310×129 compact (class 1) sections made with ASTM A992 steel. Weak axis buckling was studied and the column had an effective slenderness ratio of 48. The response of the test columns was also examined using numerical simulations based on fibre discretization of the member cross-section. Column residual stresses and strain rate effects on the material properties were both characterized and accounted for in the numerical models. The study showed that steel columns can sustain several cycles of inelastic buckling under seismic induced loading while maintaining sufficient compressive resistance to support the applied gravity loads. Residual stresses affected the column response only at the first buckling occurrence with a gradual reduction of the columns’ tangent stiffness prior to buckling as well as a reduction of the column’s compressive resistance. High strain rates anticipated during strong earthquakes increased the column buckling and post-buckling strengths. The cyclic buckling response of steel columns can be predicted adequately when using nonlinear beam–column elements and cross-section fibre discretization provided that residual stresses and strain rate effects are included in the modelling. [Copyright &y& Elsevier]