Optimization of mild solar TiO2 photocatalysis as a tertiary treatment for municipal wastewater treatment plant effluents

Abstract: The appropriate catalyst concentration for industrial wastewater treatment is several hundred milligrams per liter in solar photoreactors. Nonetheless, when the purpose of eliminating emerging contaminants in municipal wastewater treatment plant effluents is for reuse of the water, and they are present at extremely low concentrations, a tertiary treatment with a much lower photocatalyst concentration might be possible. TiO2 concentrations of only tens of mgL−1 were selected to evaluate the influence of catalyst load, initial hydrogen peroxide dose and radiation intensity on the degradation rate of five emerging contaminants (100μgL−1 of ofloxacin, sulfamethoxazole, flumequine, carbamazepine, and 2-hydroxy-biphenyl) spiked in a real municipal wastewater treatment plant effluent. Response surface methodology based on a spherical central composite design was used to optimize the parameters to find the maximal degradation rate. The experiments were carried out using an Evonik P-25 titanium dioxide suspension in a Suntest solar simulator. It has been demonstrated that the use of hydrogen peroxide is highly recommendable for working with TiO2 at low concentrations and high photon flux must be avoided. It has also been demonstrated that too low (less than 40mgL−1) TiO2 concentration is not recommendable. [Copyright &y& Elsevier]