Distribution of lanthanide and actinide elements between bis-(2-ethylhexyl)phosphoric acid and buffered lactate solutions containing selected complexants.

With the renewed interest in the closure of the nuclear fuel cycle, the TALSPEAK process is being considered for the separation of Am and Cm from the lanthanide fission products in a next generation reprocessing plant. However, an efficient separation requires tight control of the pH which likely will be difficult to achieve on a large scale. To address this issue, we measured the distribution of lanthanide and actinide elements between aqueous and organic phases in the presence of complexants which were potentially less sensitive to pH control than the diethylenetriaminepentaacetic (DTPA) used in the process. To perform the extractions, a rapid and accurate method was developed for measuring distribution coefficients based on the preparation of lanthanide tracers in the Savannah River National Laboratory neutron activation analysis facility. The complexants tested included aceto-, benzo-, and salicylhydroxamic acids, N, N, N′, N′-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN), and ammonium thiocyanate (NHSCN). The hydroxamic acids were the least effective of the complexants tested. The separation factors for TPEN and NHSCN were higher, especially for the heaviest lanthanides in the series; however, no conditions were identified which resulted in separations factors which consistently approached those measured for the use of DTPA. [ABSTRACT FROM AUTHOR]