Feasibility study of a gap damper to control seismic isolator displacements in extreme earthquakes.

SUMMARY Base isolation systems generally perform well under design-level ground motions to reduce both interstory drift and acceleration demands. During a maximum considered earthquake, however, large displacements in the base level may cause pounding between the structure and perimeter moat wall, which can lead to very high acceleration in the superstructure. A phased passive control device, or 'gap damper', has been conceived to control base isolator displacement during extreme events while having no effect on the isolation system performance for earthquakes up to design level. It is by introducing an appropriate initial gap that the device triggers additional energy dissipation during large earthquakes to limit displacements. Various combinations of hysteretic and viscous damping mechanisms are utilized to provide desired additional energy dissipation. A numerical study that assesses the ability of various gap damper models to reduce the base displacement by at least 25% while limiting the acceleration increase at the roof level that results from the sudden engagement of a damping device is devised. The energy dissipation level provided by the damper is optimized to provide the best possible performance. For base isolation systems with effective periods of isolation in the 2.5-3.0 s range, gap damper models incorporating a viscous dashpot are very effective in controlling displacement, whereas gap dampers restricted to a hysteretic damping mechanism are ineffective. The gap damper is less effective for systems with longer periods of isolation (3.5-4.0 s) because the lower target acceleration in this range is more difficult to meet. Copyright © 2012 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]